← DeepMav

FlyGuard — 개인정보 처리방침 / Privacy Policy

최종 업데이트: 2026-09-23

한국어

FlyGuard(“본 앱”)는 드론 비행 전후에 주변을 살피는 점검 도구입니다. 본 앱은 계정도 서버도 광고도 없으며, 측정과 판정은 전부 기기 안에서 이루어집니다.

1. 위치 정보

방향 안내 탭에서 표시 지점까지의 방위를 계산하고, GNSS 건강 탭에서 위성 신호와 위치 흔들림을 판정하기 위해 기기의 위치를 사용합니다. Android 12 미만에서는 블루투스·Wi-Fi 방송을 읽기 위해서도 운영체제가 위치 권한을 요구합니다. 앱이 화면에 떠 있는 동안에만 사용하며, 백그라운드에서는 받지 않습니다. 위치는 본 앱의 서버로 보내지 않습니다(본 앱에는 서버가 없습니다).

2. 지도

지도 배경은 OpenFreeMap(OpenStreetMap 데이터)에서 타일을 내려받아 그립니다. 이때 보고 있는 지도 영역과 기기의 IP 주소가 해당 서버에 전달됩니다. 본 앱이 밖으로 내보내는 통신은 이것뿐입니다.

3. 마이크

드론 소리 탐지와 프로펠러 점검은 마이크 소리를 실시간으로 분석합니다. 소리는 주파수 성분으로만 계산되며 녹음 파일로 저장하지도, 외부로 전송하지도 않습니다. 해당 탭을 닫으면 마이크 사용이 멈춥니다.

4. 카메라

방향 안내를 카메라 화면 위에 겹쳐 보여주기 위해 사용합니다. 사진이나 영상을 저장하지도, 외부로 전송하지도 않습니다.

5. 블루투스·Wi-Fi 스캔

전파 검색 탭은 주변 기기가 스스로 방송하는 Remote ID와 기기 이름을 수신해 화면에 보여줍니다. 본 앱은 어떤 기기에도 접속하거나 신호를 보내지 않으며, 수신한 내용은 화면에 표시하는 동안만 메모리에 두고 저장하지 않습니다. Remote ID 방송에 조종자 위치가 들어 있더라도 본 앱은 이를 화면에 표시하지 않으며, 기체의 위치·식별번호·속도만 보여줍니다. iPhone에서는 블루투스 방송만 수신하며, Wi-Fi Remote ID 수신은 Android에서만 됩니다.

6. 동작·기압 센서

진동 탭은 가속도·자이로 센서를, 날씨 변화 탭은 기압계를 읽습니다. 기기 안에서만 계산되며 외부로 전송되지 않습니다.

7. 기기에 저장되는 것

선택한 언어 설정만 기기 내부 저장소에 저장됩니다. 측정 결과는 저장하지 않으며, 앱을 삭제하면 설정도 함께 지워집니다.

8. 광고·분석

본 앱은 광고를 게재하지 않으며 분석·추적 SDK를 포함하지 않습니다.

9. 아동

본 앱은 만 13세 미만 아동을 대상으로 하지 않습니다.

10. 데이터 삭제 및 문의

FlyGuard는 개인정보를 수집하거나 자체 서버에 저장하지 않으므로 삭제할 서버 데이터가 없습니다. 앱을 삭제하면 기기에 저장된 설정이 제거됩니다. 문의는 harvey7926@gmail.com 으로 보내 주시면 접수 후 30일 이내에 답변합니다.

문의: harvey7926@gmail.com


English

FlyGuard (“the App”) is a set of checks for before and after a drone flight. The App has no account, no server and no ads; all measurement and assessment happens on your device.

1. Location

Your device's position is used to compute the bearing to a marked point on the direction tab, and to judge satellite signal and position wander on the GNSS health tab. On Android below 12 the operating system also requires the location permission to read Bluetooth and Wi-Fi broadcasts. Location is used only while the App is on screen, never in the background, and is never sent to a server of ours (there is none).

2. Map

Map tiles are downloaded from OpenFreeMap (OpenStreetMap data). The map area you are viewing and your device's IP address reach that server. This is the only network traffic the App makes.

3. Microphone

Drone detection and the propeller check analyse microphone audio live. Audio is reduced to frequency components on the spot; it is never saved as a recording or transmitted. Microphone use stops when you leave the tab.

4. Camera

The camera preview is used only as the backdrop for the direction guide. No photo or video is stored or sent.

5. Bluetooth and Wi-Fi scanning

The radio search tab receives Remote ID and device names that nearby devices broadcast on their own. The App never connects to or transmits to any device, and what it receives is held in memory only while displayed; nothing is stored. Even when a Remote ID broadcast carries the operator's position, the App does not display it; it shows only the aircraft's position, identifier and speed. On iPhone only Bluetooth broadcasts are received; Wi-Fi Remote ID reception is available on Android only.

6. Motion and pressure sensors

The vibration tab reads the accelerometer and gyroscope; the weather tab reads the barometer. Everything is computed on the device and nothing is transmitted.

7. What is stored on the device

Only your chosen language is stored locally. Measurements are not saved. Uninstalling the App removes the setting.

8. Advertising and analytics

The App shows no advertising and contains no analytics or tracking SDK.

9. Children

The App is not directed at children under 13.

10. Deletion and contact

FlyGuard collects no personal data and keeps nothing on a server, so there is no server-side data to delete. Uninstalling the App removes the local setting. Questions: harvey7926@gmail.com — answered within 30 days.

Contact: harvey7926@gmail.com